Compressor Bass

Bass Compressor Manual
Looking for the Bass Compressor manual?  Here it is!  (download below)
Thu, 7 Sep, 2023 at 2:11 PM
Can I use an 18v power supply with the Bass Compressor?
The Bass Compressor can handle an 18V power supply but there's no benefit over using a 9V supply. The pedal regulates the input voltage to +/-8V so you ...
Wed, 2 Dec, 2020 at 4:51 PM
Bass Compressor Ribbon Replacement Guide
If you're looking to replace the ribbon cable in your Empress Bass Compressor, here's a handy set of instructions!
Fri, 22 Jan, 2021 at 6:19 PM
How do I use the Sidechain Insert on the Bass Compressor?
Our new compressors use 1/8" TRS jacks for the sidechain insert.  The tip is the send and the ring is the return.  This means the tip of the connected ...
Wed, 2 Jun, 2021 at 7:18 PM
Where can I find the switch to disengage the colour circuit on the Bass Compressor?
The colour circuit can be bypassed in either or both tone switch positions via internal dipswitches. When you open the pedal the switch is located just ...
Tue, 6 Jul, 2021 at 1:03 PM
Does my Bass Compressor Need a Ribbon Cable Replacement?
Only the first run of Bass Compressors have a noise issue.  If your Bass Compressor is above serial number 240(silver) or 260(blue) then your compressor sho...
Tue, 28 Sep, 2021 at 1:36 PM
What are the differences between the Compressor MKII and Bass Compressor?
The Compressor MKII has a tilt style Eq knob and a switch for setting the cutoff frequency of the Sidechain Highpass Filter (off, 120Hz, or 240Hz). The ...
Wed, 6 Sep, 2023 at 2:20 PM