What kind of bypassing does the Tremolo2 have?
The Tremolo2 has true bypass switching. It uses a relay to switch.
Tue, 24 Jun, 2014 at 4:29 AM
How slow/fast can the tremolo2 rate go?
When the rate knob is turned all the way counterclockwise, the tremolo period is around 1 second. If you're in tap tempo mode, the tremolo period can go...
Wed, 22 May, 2024 at 5:59 PM
Can you set the tempo of the presets with the on board tap tempo switch?
No you can't. In preset mode, you can only change the tempo of the preset with the knob, or an external tap switch. 
Sat, 19 Jul, 2014 at 1:29 AM
Can a preset be auto-loaded on start up?
If you set the tremolo2 to preset mode, the 1st preset will be loaded on startup.
Wed, 10 Jun, 2015 at 2:33 PM
Does the midi information get saved in memory? I.E. Midi channel 4 on start up.
Information like MIDI channel is saved in memory, so you'll be able to set the tremolo2 to respond to midi channel 4 on startup.
Wed, 10 Jun, 2015 at 2:34 PM
Differences between the original Tremolo and the Tremolo2?
There are two big differences between the original Tremolo and our newer Tremolo2. 1) The Tremolo2 has presets, the original does not. So with the Tremo...
Wed, 22 May, 2024 at 6:10 PM
What is the calibration procedure to change the amount of gain the engaged signal has?
Before testing the Empress Tremolo2 in our shop, we calibrate it so that the engaged signal is unity gain when the output knob is at 12 o'clock. You ...
Wed, 20 Dec, 2017 at 2:08 PM
How do I set / reset the 1 on any given rhythm?
"Every time I want to jam with my band, the rhythm is off and theres no way to restart it." Here is the solution: Create a preset of the d...
Tue, 3 Jan, 2017 at 3:46 PM
If I get a really sweet sound in knob or tap mode can I store it as a preset?
You sure can!   Here's a little trick: Once you find that sweet sound, switch over to preset mode. Since all of your settings are physically on t...
Wed, 22 May, 2024 at 6:12 PM
Tremolo2 Manual
Looking for the Tremolo2 manual?  Here it is!  (download below)
Thu, 3 Oct, 2019 at 3:03 PM