ZOIA
Below are instructions on how to update the firmware on your ZOIA and EUROBURO. Attached are the firmware files and the changelog. NOTE 1: Version 2....
Tue, 27 Aug, 2024 at 12:01 PM
This spreadsheet of ZOIA's modules strives to keep the user fully informed about the entirety of the module functionality. It also strives to be up to d...
Fri, 22 Mar, 2019 at 3:26 PM
ZOIA will not likely replace your pedalboard out of the box but it has the potential to. It was not designed to be a digital pedalboard and replace al...
Wed, 1 May, 2019 at 4:26 PM
THIS IS ONLY AN ISSUE WITH VERY EARLY ZOIAS, NEW ZOIAS DO NOT NEED A MOD After lots of troubleshooting we have devised a plan for folks with stubborn MIDI ...
Mon, 27 May, 2024 at 4:46 PM
Looking for the ZOIA manual? Here it is! (download below) If you're wondering what has changed, check out the change-log in the firmware update se...
Thu, 9 Sep, 2021 at 11:56 AM
Here's the old firmware versions. If you want the new firmware versions, go here: https://support.empresseffects.com/support/solutions/articles/10002753...
Mon, 6 Feb, 2023 at 12:45 PM
Generally, you should avoid doing this unless you absolutely need to. All ZOIAs are calibrated during production. To recalibrate the colours on ZOIA's ...
Mon, 12 Jun, 2023 at 4:34 PM
No this will not harm your ZOIA. The ZOIA will only respond to voltage from 0-5 volts but sending higher voltage from 5-12 volts will not damage the unit. ...
Fri, 19 Mar, 2021 at 2:16 PM
The ZOIA receives CV(or MIDI) on the tip of a 1/4" cable and sends out on the ring side. So sending CV in to the ZOIA is pretty simple, you could just...
Mon, 27 May, 2024 at 4:54 PM
This could be an issue with the TRS spec on the device you are trying to communicate with. The world of TRS MIDI was once a wild place. There are 2 w...
Mon, 27 May, 2024 at 5:04 PM