Empress Effects Support

The ZOIA receives CV(or MIDI) on the tip of a 1/4" cable and sends out on the ring side.  So sending CV in to the ZOIA is pretty simple, you could just...

This could be an issue with TRS spec on the device you are trying to communicate with.   The world of TRS MIDI was once a wild place.  Th...

You can find the Euroburo Addendum here, it covers the changes that make the Euroburo unique!(download below) If you're wondering what has changed, ...

When sending clocks, triggers or gates into the input jacks on the Euroburo to internal ZOIA modules small amounts of noise may cause modules to trigger uni...

The baseline latency when bypassed is 3.21ms and 1.33ms with each module.

Tools: #14 socket #12 socket 1/2'' socket 1/16 hex key 5/64 hex key phillips screwdriver replacement button pad Step 1 remove the backpla...

// half step is 1, whole step is 2 static const Scale scale[NUMBER_OF_TOTAL_SCALES] = {   { .scale_name = "Chromatic", .scale_increments = { 1, ...

Zoia, like all of our pedals, uses MIDI Type A (MIDI Standard). This is the same type used by other companies such as Korg and Make Noise.  If your MIDI...

Does your screen look like this when trying to load patches from the SD card? Only says null, null, null, and null... Chances are your SD card is f...

SD Card needs to be FAT32 formatted If it isn't, you can format in the Config menu Files have to be 48kHz / 16bit Stereo WAV files to work WAV fil...